Professor In-charge:
- Md. Irshad Alam, Assistant Professor, Department of Mechanical Engineering
Lab Assistant: Mr. Anil Kumar Nathani
Equipment List
Sl. No. | Name of the Equipments |
1 | Simply supported beam |
2 | Funicular polygon |
3 | Belt friction |
4 | Sliding friction |
5 | Fly wheel |
6 | Worm & Worm wheel |
7 | Screw jack |
8 | Winch crab |
9 | Jib crane |
10 | Young modulus apparatus |
11 | Bifilar pendulum |
12 | Wheel and axel differential |
13 | Pulley block of different type |
14 | Apparatus for determination of g by falling |
15 | Bevel gear train |
16 | Spring tension and compression apparatus |
Professor In-charge:
- Dr. Pramod Kumar, Assistant Professor, Department of Mechanical Engineering
Lab Assistant:
- Mr. Amit Kumar
Equipment List
Sl. No. | Name of the Equipment |
1 | Degree of freedom, single and double slider crank mechanism |
2 | Static and dynamic Balancing demonstrator |
3 | Motorized gyroscope apparatus |
4 | Coriolis Components of Acceleration apparatus |
5 | Cam analysis apparatus |
6 | Universal vibration apparatus |
7 | Universal governor apparatus |
8 | Slip and creep measurement apparatus |
9 | Whirling shaft demonstrator |
Dr.
Professor In-charge:
- Mr. Pappu Kumar, Assistant Professor, Mechanical Engineering
Lab Assistant:
- Mr. Anil Kumar Nathani
Equipment List
| Sl. No. | Name of the Equipment |
| 1 | Bomb Calorimeter |
| 2 | Demonstrational section working model of 4 stroke Diesel Engine |
| 3 | Demonstrational section working model of 2 stroke Diesel Engine |
| 4 | Demonstrational section working model of 4 stroke Petrol Engine |
| 5 | Demonstrational section working model of 2 stroke Petrol Engine |
| 6 | Computerized Multicylinder Petrol Engine |
| 7 | Computerized single cylinder 4 stroke diesel engine |
Professor In-charge:
- Mr. Hemant Kumar Choudhary, Assistant Professor, Mechanical Engineering
Lab Assistant:
- Mr. Anil Kumar Nathani
Equipment List
| Sl. No. | Name of the Equipment |
| 1 | Steam turbine test rig |
| 2 | Double Stage Air Compressor |
| 3 | Demonstrational Models of Boilers & Turbines |
| 4 | Temperature Measurement & Calibration System |
Professor In-charge:
- Mr. Shalini Anand, Assistant Professor, Mechanical Engineering
Lab Assistant:
Equipment List
| Sl. No. | Name of the Equipment |
| 1 | Air conditioning test rig (Windows type) |
| 2 | Cascade refrigeration system. |
| 3 | Domestic refrigeration test rig. |
| 4 | Ice plant test rig |
| 5 | Water cooler test rig. |
| 6 | Air conditioning test rig (General cycle type). |
| 7 | Vapour compression Refrigeration trainer. |
| 8 | Water cooler trainer. |
Professor In-charge:
- Mr. Gulshan Kumar
Lab Assistant:
- Mr. Anil Kumar Nathani
Equipment List
| Sl. No. | Name of the Equipment |
| 1 | Composite layer apparatus |
| 2 | Forced convection apparatus |
| 3 | Pin fin apparatus |
| 4 | Metal rod apparatus |
| 5 | Parallel and counter flow heat exchanger |
| 6 | Stefan boltzman apparatus |
| 7 | Critical heat flux apparatus |
Professor In-charge:
- Mr. Pappu Kumar
Lab Assistant:
- Mr. Radhey shyam Singh
Professor In-charge:
- Mr. Irfan Haider
Professor In-charge:
- Mr. Shalini Anand, Assistant Professor, Mechanical Engineering
Lab Assistant: Mr. Simant Ishwar (Guest)
Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
Lab Assistant: Mr. Raja Babu Kumar (Guest)
Equipment List :
| Sl. No. | Name of the Equipment |
| 1 | Optical-Microscope |
| 2 | Viker Hardness |
| 3 | Double Disk Polishing-Machine |
| 4 | PC System & Imaging Software |
| 5 | Polishing Cloths |
| 6 | Diamond Suspension/Slurry |
| 7 | Colloidal Silica/Alumina |
- Professor In-charge:
Mr. Hemant Kumar Choudhary, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Name of Equipment: Pin on Disk Tribometer
- Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Equipment List:
| Sl. No. | Name of the Equipment |
| 1 | High temperature Furnace 1400 degree |
| 2 | Bottom pouring type Stir Casting – For AL & Mg |
| 3 | Fire Extinguisher and Safety Equipment |
Professor In-charge:
- Dr. Pramod Kumar, Assistant Professor, Department of Mechanical Engineering
Lab Assistant: Mr. Simant Ishwar (Guest)
Equipment List:
| Sl. No. | Equipment list |
| 1 | AutoCAD software |
| 2 | ANSYS software |
| 3 | SolidWorks software |
| 4 | Matlab software |
| 5 | Ms Office |
| 6 | Smart Board |
- Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Name of Equipment : CNC ( Computer Numerical Control) turning machine.
- Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Name of Equipment: CNC Wire Cut Electrical discharge machine.
- Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Equipment List:
| Sl. No. | Name of the Equipment |
| 1 | CFF 3D Printer |
| 2 | SLA 3D Printer |
| 3 | Resin Cartridge |
| 4 | Post-Processing Unit (Wash Station & Cure Station) |
| 5 | Computer / Software Interface |
| 6 | Filament Spool |
Workshop
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr.Radhesh Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | All Geared Head Precision Lathe Machine |
| 2 | All Geared Head Shaping Machine |
| 3 | Carbide Tipped Tool Grinder |
| 4 | Centre Drilling Machine |
| 5 | Hacksaw Cutting Machine |
| 6 | Hydraulic Control Hacksaw Machine |
| 7 | Radial Grinding Machine |
| 8 | Tool Grinding Machine |
| 9 | Vertical Milling Machine |
| 10 | Slotter machine |
| 11 | Horizontal Milling Machine |
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr. Amit Kumar
Equipment List
S. No. | Name of the Equipments |
1 | Marking and measuring tool |
2 | Cutting tool |
3 | Planning tool |
4 | Drilling and Boring tool |
5 | Striking tool |
6 | Supporting and Holding tool |
7 | Miscellaneous tools |
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr. Ram Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | Forge or Hearth |
| 2 | Anvil |
| 3 | Hammers |
| 4 | Tongs |
| 5 | Vises or Clamps |
| 6 | Hardy Tools |
| 7 | Chisels |
Professor In-charge:
- Prof. Vikash Kumar
Lab Assistant:
- Mr. Pramod Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | Showel |
| 2 | Trowel |
| 3 | Riddle |
| 4 | Rammer |
| 5 | Draw spike |
| 6 | Swab |
| 7 | Vent wire |
| 8 | Slick tool |
| 9 | Cope & Drag Box |
Professor In-charge:
- Prof. Vikash Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | Steel rule |
| 2 | Steel square |
| 3 | Scriber |
| 4 | Divider |
| 5 | Centre punch |
| 6 | Straight snip |
| 7 | Ball pean hammer |
| 8 | Riveting hammer |
| 9 | Mallet / Rubber hammer |
| 10 | Scissor |
| 11 | Nose plier |
| 12 | G.I. Sheet |
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr. Rupesh Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | Arc welding Setup |
| 2 | Gas Welding |
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr. Radheyshyam Singh
Equipment List
| S. No. | Name of the Equipments |
| 1 | Files |
| 2 | Hand hacksaw |
| 3 | Hammer |
| 4 | Scrapper |
| 5 | Drill bit |
| 6 | Centre Punch |
| 7 | Bench Vice |
| 8 | Chisels |
You must be logged in to post a comment.