Engineering Mechanics Lab
Dynamics of Machinery Lab
I. C. Engine Lab
Steam Power System Lab
Refrigeration & Air Conditioning Lab
Heat & Mass Transfer Lab
Engineering Graphics Lab
Computer Numeric Control (CNC) Lab
Machine Drawing Lab
Metallography Lab
Tribology Lab
Material Synthesis Lab
VNS LAB (Additional facility)
Conventional Machine Lab (Additional facility)
Non-Conventional Machine Lab (Additional facility)
Additive Manufacturing Lab (Additional facility)
Engineering Mechanics Lab
Professor In-charge:
- Md. Irshad Alam, Assistant Professor, Department of Mechanical Engineering
Lab Assistant: Mr. Anil Kumar Nathani
Equipment List
|
Sl. No. |
Name of the Equipments |
|
1 |
Simply supported beam |
|
2 |
Funicular polygon |
|
3 |
Belt friction |
|
4 |
Sliding friction |
|
5 |
Fly wheel |
|
6 |
Worm & Worm wheel |
|
7 |
Screw jack |
|
8 |
Winch crab |
|
9 |
Jib crane |
|
10 |
Young modulus apparatus |
|
11 |
Bifilar pendulum |
|
12 |
Wheel and axel differential |
|
13 |
Pulley block of different type |
|
14 |
Apparatus for determination of g by falling |
|
15 |
Bevel gear train |
|
16 |
Spring tension and compression apparatus |
Dynamics of Machinery Lab
Professor In-charge:
- Dr. Pramod Kumar, Assistant Professor, Department of Mechanical Engineering
Lab Assistant:
- Mr. Amit Kumar
Equipment List
|
Sl. No. |
Name of the Equipment |
|
1 |
Degree of freedom, single and double slider crank mechanism |
|
2 |
Static and dynamic Balancing demonstrator |
|
3 |
Motorized gyroscope apparatus |
|
4 |
Coriolis Components of Acceleration apparatus |
|
5 |
Cam analysis apparatus |
|
6 |
Universal vibration apparatus |
|
7 |
Universal governor apparatus |
|
8 |
Slip and creep measurement apparatus |
|
9 |
Whirling shaft demonstrator |
Dr.
I. C. Engine Lab
Professor In-charge:
- Mr. Pappu Kumar, Assistant Professor, Mechanical Engineering
Lab Assistant:
- Mr. Anil Kumar Nathani
Equipment List
| Sl. No. | Name of the Equipment |
| 1 |
Bomb Calorimeter |
| 2 | Demonstrational section working model of 4 stroke Diesel Engine |
| 3 | Demonstrational section working model of 2 stroke Diesel Engine |
| 4 | Demonstrational section working model of 4 stroke Petrol Engine |
| 5 | Demonstrational section working model of 2 stroke Petrol Engine |
| 6 | Computerized Multicylinder Petrol Engine |
| 7 | Computerized single cylinder 4 stroke diesel engine |
Steam Power System Lab
Professor In-charge:
- Mr. Hemant Kumar Choudhary, Assistant Professor, Mechanical Engineering
Lab Assistant:
- Mr. Anil Kumar Nathani
Equipment List
| Sl. No. | Name of the Equipment |
| 1 | Steam turbine test rig |
| 2 |
Double Stage Air Compressor |
| 3 |
Demonstrational Models of Boilers & Turbines |
| 4 | Temperature Measurement & Calibration System |
Refrigeration & Air Conditioning Lab
Professor In-charge:
- Mr. Shalini Anand, Assistant Professor, Mechanical Engineering
Lab Assistant:
Equipment List
| Sl. No. | Name of the Equipment |
| 1 | Air conditioning test rig (Windows type) |
| 2 | Cascade refrigeration system. |
| 3 | Domestic refrigeration test rig. |
| 4 | Ice plant test rig |
| 5 | Water cooler test rig. |
| 6 | Air conditioning test rig (General cycle type). |
| 7 | Vapour compression Refrigeration trainer. |
| 8 | Water cooler trainer. |
Heat & Mass Transfer Lab
Professor In-charge:
- Mr. Gulshan Kumar
Lab Assistant:
- Mr. Anil Kumar Nathani
Equipment List
| Sl. No. | Name of the Equipment |
| 1 | Composite layer apparatus |
| 2 | Forced convection apparatus |
| 3 | Pin fin apparatus |
| 4 | Metal rod apparatus |
| 5 | Parallel and counter flow heat exchanger |
| 6 | Stefan boltzman apparatus |
| 7 | Critical heat flux apparatus |
Engineering Graphics Lab
Professor In-charge:
- Mr. Pappu Kumar
Lab Assistant:
- Mr. Radhey shyam Singh
Computer Numeric Control (CNC) Lab
Professor In-charge:
- Mr. Irfan Haider
Machine Drawing Lab
Professor In-charge:
- Mr. Shalini Anand, Assistant Professor, Mechanical Engineering
Lab Assistant: Mr. Simant Ishwar (Guest)
Metallography Lab
Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
Lab Assistant: Mr. Raja Babu Kumar (Guest)
Equipment List :
| Sl. No. | Name of the Equipment |
| 1 | Optical-Microscope |
| 2 | Viker Hardness |
| 3 | Double Disk Polishing-Machine |
| 4 | PC System & Imaging Software |
| 5 | Polishing Cloths |
| 6 | Diamond Suspension/Slurry |
| 7 | Colloidal Silica/Alumina |
Tribology Lab
- Professor In-charge:
Mr. Hemant Kumar Choudhary, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Name of Equipment: Pin on Disk Tribometer
Material Synthesis Lab
- Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Equipment List:
| Sl. No. | Name of the Equipment |
| 1 | High temperature Furnace 1400 degree |
| 2 | Bottom pouring type Stir Casting – For AL & Mg |
| 3 | Fire Extinguisher and Safety Equipment |
VNS LAB (Additional facility)
Professor In-charge:
- Dr. Pramod Kumar, Assistant Professor, Department of Mechanical Engineering
Lab Assistant: Mr. Simant Ishwar (Guest)
Equipment List:
| Sl. No. | Equipment list |
| 1 | AutoCAD software |
| 2 | ANSYS software |
| 3 | SolidWorks software |
| 4 | Matlab software |
| 5 | Ms Office |
| 6 | Smart Board |
Conventional Machine Lab (Additional facility)
- Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Name of Equipment : CNC ( Computer Numerical Control) turning machine.
Non-Conventional Machine Lab (Additional facility)
- Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Name of Equipment: CNC Wire Cut Electrical discharge machine.
Additive Manufacturing Lab (Additional facility)
- Professor In-charge:
Dr. Jigesh Yadav, Assistant Professor, Mechanical Engineering
- Lab Assistant: Mr. Raja Babu Kumar (Guest)
Equipment List:
| Sl. No. | Name of the Equipment |
| 1 | CFF 3D Printer |
| 2 | SLA 3D Printer |
| 3 | Resin Cartridge |
| 4 | Post-Processing Unit (Wash Station & Cure Station) |
| 5 | Computer / Software Interface |
| 6 | Filament Spool |
Workshop
Machine Shop
Carpentry Shop
Blacksmithy Shop
Foundry Shop
Sheet Metal Shop
Welding Shop
Fitting Shop
Machine Shop
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr.Radhesh Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | All Geared Head Precision Lathe Machine |
| 2 | All Geared Head Shaping Machine |
| 3 | Carbide Tipped Tool Grinder |
| 4 | Centre Drilling Machine |
| 5 | Hacksaw Cutting Machine |
| 6 | Hydraulic Control Hacksaw Machine |
| 7 | Radial Grinding Machine |
| 8 | Tool Grinding Machine |
| 9 | Vertical Milling Machine |
| 10 | Slotter machine |
| 11 | Horizontal Milling Machine |
Carpentry Shop
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr. Amit Kumar
Equipment List
|
S. No. |
Name of the Equipments |
|
1 |
Marking and measuring tool |
|
2 |
Cutting tool |
|
3 |
Planning tool |
|
4 |
Drilling and Boring tool |
|
5 |
Striking tool |
|
6 |
Supporting and Holding tool |
|
7 |
Miscellaneous tools |
Blacksmithy Shop
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr. Ram Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | Forge or Hearth |
| 2 | Anvil |
| 3 | Hammers |
| 4 | Tongs |
| 5 | Vises or Clamps |
| 6 | Hardy Tools |
| 7 | Chisels |
Foundry Shop
Professor In-charge:
- Prof. Vikash Kumar
Lab Assistant:
- Mr. Pramod Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | Showel |
| 2 | Trowel |
| 3 | Riddle |
| 4 | Rammer |
| 5 | Draw spike |
| 6 | Swab |
| 7 | Vent wire |
| 8 | Slick tool |
| 9 | Cope & Drag Box |
Sheet Metal Shop
Professor In-charge:
- Prof. Vikash Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | Steel rule |
| 2 | Steel square |
| 3 | Scriber |
| 4 | Divider |
| 5 | Centre punch |
| 6 | Straight snip |
| 7 | Ball pean hammer |
| 8 | Riveting hammer |
| 9 | Mallet / Rubber hammer |
| 10 | Scissor |
| 11 | Nose plier |
| 12 | G.I. Sheet |
Welding Shop
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr. Rupesh Kumar
Equipment List
| S. No. | Name of the Equipments |
| 1 | Arc welding Setup |
| 2 | Gas Welding |
Fitting Shop
Professor In-charge:
- Prof. Vikash Kumar
Lab Instructor:
- Mr. Radheyshyam Singh
Equipment List
| S. No. | Name of the Equipments |
| 1 | Files |
| 2 | Hand hacksaw |
| 3 | Hammer |
| 4 | Scrapper |
| 5 | Drill bit |
| 6 | Centre Punch |
| 7 | Bench Vice |
| 8 | Chisels |